Description

A key component in the sustain mechanism of the Rhodes. The damper rail pins hold the damper rail into the harp support blocks.

These can go missing or become corroded over time, causing damper issues and introducing noise into the pedal mechanism. Here are brand new stainless steel replacements.

Early model Rhodes have three pins – the one in the middle has a drilled hole and screw running through. The screw is not included in this set, but usually is not missing.

Later model Rhodes just have two pins – one at either support block.

Note if you are unsure, unscrewing the harp and inspecting the damper rail will reveal what you need.