Latest Posts

My Clavinet won’t make a sound. Help!

Assuming the jack cable is plugged in (believe me it happens more than you’d think!), this could be one of several reasons, most of which are very simple fixes: The battery is dead Hohner Clavinet’s use a 9V Battery to power the internal pre-amp. The most common reason it won’t power on is because the […]

How to find a dead Rhodes pickup

Over time the pickups in Rhodes pianos are prone to failure, especially if your Rhodes has suffered damp or water damage. There is also a certain batch of pickups in late Mark I and Mark II pianos which have a white sleeve around them. Unfortunately these pickups are notorious for failing. In any case, the […]

Why do repeated notes on my Rhodes choke when I’m pressing the sustain pedal?

One of the limitations of the Rhodes is when the pedal is down and when a key is repeatedly played the note can often deaden or ‘choke’. this is because when the tine is struck by the hammer the tine vibrates in a up and down motion, and when the hammer strikes the tine at […]

My Rhodes sounds dull and lifeless. Help!

It a classic Rhodes problem, your Rhodes sounded great but now its sounding dull and lifeless. For such an instrument that in many ways is quite a simple design, it’s funny how the the changes in sound can be so dramatic. This issue could be down to many things, so we’ll start with simpler and […]

There are some dead notes on my Rhodes. Help!

This is a common issue that affects all Rhodes pianos at some point. This could be one of a number of issues, here are some places to start: (Note: if unsure of any of these terms, consult the Glossary.) Remove the lid and inspect the harp where the problem is Rhodes lids are easy to remove, in […]

Damper Arm (Wurlitzer)

A damper arm is an action mechanism found in Wurlitzer pianos. It is responsible for lifting the damper felt away from the reed when it is struck by the hammer. This causes the reed to sustain. When the key is released, the damper arm falls down and the damper felt mutes the reed. It also […]

Tine Screw

A tine screw is a machine screw that connects the tine and the tone bar. Its function is to connect these two components of the tone bar assembly. It has a hex screw head, and can be adjusted with a 5/16″ nut driver. It usually has an engraved V on the top face. It is […]

Search:
Latest Posts:
Random Piano Part:
Post Categories:
Post Tags:

Action Regulation Buzzing Clavinet Action Clavinet D6 Clavinet E7 Clavinet Electronics Dampers Dead Notes Effects Grand Piano Keyboard Regulation Noise Pianet Action Pianet Electronics Pickups Reeds Rhodes Action Rhodes Electronics Rhodes Harp Rhodes Mark II Rhodes Mk I Rhodes Mk II Safety Speakers Sticking Keys Strings Sustain Sustain Pedal Tine & Tone Bar Transformer tuning Upright Piano Voicing Wurlitzer 200 Wurlitzer 200A Wurlitzer Action Wurlitzer Electronics Wurlitzer Reed Bar

0
    0
    Basket
    Your basket is emptyReturn to Shop